Pattern aprons schoolgirl at graduation

Depending on the application, an apron pattern may be different.The easiest option - this apron without bib.It is enough to pull up on three sides of a rectangular piece of cloth and sew the fourth side ties suitable length.But apron with bib much more beautiful and functional, but on the basis of such a pattern can make a variety of models.

to the product beautifully sat in the figure, pattern apron should be darts or assembly at the waist.Considerable importance is the correct length of the shoulder straps, as well as their location.Now we consider one of the basic pattern aprons options that you can modify as desired: rounded edges at the hem, alter bib, sew ruffles, etc.

School apron pattern for size 42

necessary to remove three measurements:

  1. Waist circumference (68 cm).
  2. hem length as desired (we have 53 cm).
  3. length of the straps.Measuring tape need to throw over your shoulder and measure the distance from the waist to the front waist line back (72 cm).

Draw a rectangle with sides of

53 cm (length hem) and 22 cm (waist circumference / 4 +5).This is half of the lower part.Note on the sheet where you will be waist line, and where - the hem of her skirt.Turn the sheet so that the waistline has top and bottom hem.Then the line will be on the right side, and the middle part, which forms the fold halves - the left.

From the upper-left corner of the source rectangle set aside 1 cm down.Connect the points obtained from the upper right corner.Only that holding the line is divided into 3 equal parts.At the points of division will be placed folds.The width of the folds - 4 cm, ie, both sides of the division points have to be postponed to 2 cm. Designate a place long folds of vertical lines on the pattern.

proceed to drawing the hem.From the lower-right corner of the rectangle should be deferred to the right 4 cm, then up to 1 cm. The resulting points are connected by a straight line to the upper right corner of the rectangle, smooth arc to connect the same point with the lower-left corner of the rectangle.Pattern apron at the bottom ready.

Bib looks like a trapezoid.Its height is 13 cm, the width at the top of 12 cm at the bottom - 10 cm.

Shoulder straps have a length of 72 cm (by Merck) and a width of 16 cm. Sewed folded in half lengthwise.

Belt can be made in different ways.If you make a belt clasp, its size - 72 cm in length (circumference of waist + 4 cm) and 5 cm in width.If you want to tie a belt, increase the length by about half.

pocket is 10 x 10 cm. The upper right corner of the pocket is located at a distance of 7 cm below and 5 cm to the left of the upper right corner of the pattern.Optionally, you can make two pockets, but since the school is now sew an apron only elegant, pockets on it optional.

Pattern apron ready, now a few words about how to cut out and sew.First, do not forget about SEAM: 1.5 cm at the site of two sewing cloths, 2-5 cm at the site of the hem fabric.Belt Cut two pieces.

first bend and hem bottom and sides of the bottom half of the apron.Lay folds and secure them to a live thread.Fold the hem and the top part of the breastplate.Fold in half along the straps and into the seam Sew bib straps.Take the two belt parts.Find the middle parts Chest, waist and bottom of the apron, combine them all.On the live thread baste belt inserting parts bib apron and the bottom half in the seam zone.Cut the excess fabric at once.Follow the line on the edges of the belt, remove the auxiliary thread and sew the pocket.Apron is ready!