Fluid for electronic cigarettes with his hands (at home)

Today, many former tobacco users have switched to the popular product - the electronic cigarette.Device manufacturers offer their customers the widest range of brands, a variety of shapes and a wide price range.However, there are people for whom the creation of a cigarette with his own - a matter of principle.In this article we answer the frequently asked question: How to make a liquid for electronic cigarettes?Photos provided here illustrate the popularity of EC and the diversity of their product range.

electronic cigarette device

First we need to understand what is in the product.This body, atomizer, battery, cartridge, and a microchip.Each of these parts can be purchased in a specialty store.However, a much cheaper and more interesting to fabricate parts and fluid for electronic cigarettes with their hands out of scrap materials.For example, a small flashlight or a medical syringe is quite possible to accommodate future housing for cigarettes.As the battery fit finger or mizinchikovye batteries.

The housing can be replaced by an ordinary atomizer mouthpiece.To create a full atomizer you will also need a ceramic cup and a wick.METAP and the spiral of nichrome filament are not compulsory details.

How to assemble a cigarette?

assembly of the electronic cigarette is not difficult.First, fix the wiring with the two screws inside the body of your atomizer, and then connect them to the contacts of the batteries.A swirling spiral of nichrome filament must be securely attached to the opposite ends of the screws.Optionally, you can also adjust the button and to monitor and control heating, but this is not mandatory.Unwanted items may only complicate the process, and in fact, our task - to make the case and the liquid for electronic cigarette with his hands in the home, that is, so that each person could cope with this task.

main thing - just to follow the recommendations of the assembly, after which all components are pre-bonded to each other, neatly placed in the main body of the product.Check whether assembled electronic cigarette, is simple enough.If the back of the atomizer air enters during exhalation, you have managed to create high-quality housing and a liquid for electronic cigarette with his hands.

What is a liquid ES?

Before we tell you about the process of its creation, it is necessary to clearly understand what it represents.Firstly, it is designed for cartridge refilling E-cigarettes.It is thanks to the composition of the liquid produced during smoking vapor that simulates smoke and ordinary tobacco for a long time familiar.There are several types of such refills, and they differ depending on the percentage of nicotine.This is another plus, because you can buy or make a liquid for electronic cigarettes without nicotine with their hands at all, or to regulate its concentration.It is a variety of flavors, which is important.Each person can choose his favorite flavor and replace it if it is bored.In specialty stores usually sell cartridges, ie reservoirs, where he kept smoking mixture.The volume of the cartridges may be different, but on average it will replace you 30-40 ordinary cigarettes.Once the cartridge is over, it is often thrown away, but people with experience of smoking EC claim that do not need it.It is much more economical simply to fill his "medicine" (as they are often referred to as refueling), the more you can do this very liquid for electronic cigarette with his hands.

composition

It's time to find out what components are included in the standard composition of the liquid for electronic cigarette type.Classic embodiment includes distilled water, propylene glycol or glycerin food purified nicotine in liquid form and flavors.As you can see, the ingredients are not too complicated, it is not difficult to get them all.It is advantageous to make the liquid for electronic cigarette with his hands."Where a lot of steam, there is a qualitative dressing" - is the fundamental law, because the composition is directed to a simulation of the smoke.

Propylene glycol is a transparent liquid having a weak though, but rather a characteristic odor.Consistency slightly viscous, has a sweet taste.This component is permissible and widely used by many countries as a dietary supplement.If we talk about food, you can easily find in the composition of propylene glycol, sweets, favorite oatmeal cookies or a sponge roll.Energy and many sodas also contain this component.It is used in the manufacture of cosmetics, because it has a softening and moisturizing effect, which is extremely useful for creating different kinds of shampoos, lotions, etc. As for our topic, the question of how to make liquid for electronic cigarettes at home,you can safely answer without this component - no way.Here, due to its hygroscopic propylene glycol allows to keep the required level of moisture for long-term storage.It also performs the sterilization, preservative and antimicrobial function.

Glycerin

viscous, clear and colorless liquid that dissolves completely in water.Component is often used as a food additive is used to make a tea extract, ginger, coffee, and other plants.It is widely used in the production of mustard, all kinds of jelly, drinks that do not contain alcohol, and vinegar.For those who at least once wondered how to make liquid for electronic cigarettes thick, the answer is found: help glycerol.It is widely used in industry for dissolving all sorts of drugs and increase the viscosity of liquid components.

Nicotine

In fact it is an alkaloid found in large quantities in plants belonging to the family Solanaceae.These include tobacco, tomato, potato, eggplant, etc.Due to its hygroscopic properties it is readily miscible with water.Nicotine has a pungent odor and taste.Frequent use causes both physical and strong psychological dependence.It is important to remember that nicotine - a real poison that could lead to death.Therefore, if you are thinking about how to make liquid for electronic cigarettes yourself, remember to refuel only used diluted nicotine.Skin even droplets of this substance in its pure form is sure to provide you with health in serious trouble.If your ultimate goal of using ES - finally quit smoking, please be patient.Do not just give up nicotine cartridges.It is important to clearly understand how to make liquid for electronic cigarettes.In mg, step by step, gradually reduce the nicotine content in the gas station.The only way you will be able to forget about his addiction.

Flavours

In order to impart flavor and aroma to the modern liquid add special flavor identical to natural.It was nice not just to smoke electronic cigarette and enjoy at the same smells favorite colors or, say, fruit.In order to produce a liquid for electronic cigarette with his own hands, using such flavors that are not toxic by inhalation and do not leave burning and oil pollution by evaporation.Popular essential oils are definitely not suitable.

Lovers Electric today is extremely difficult to surprise, because the stores offer the broadest range of different additives and fillers fragrant.Those who initially difficult to abandon the usual cigarette suit filling with the classic tobacco smell, and lovers can enjoy the exotic flavors of fruits, chocolate, vanilla and mint.For all the sophisticated and there are "medicine" flavored alcoholic beverages such as gin, brandy or liqueur.Such a variety of fillers gives a lot of options, how to make liquid for electronic cigarettes, to choose their favorite flavor and to control the content of nicotine.What could be more convenient?

News Does the independent preparation?

Personally refueling ES do with multiple targets.Firstly, for the sake of reducing costs, since the liquid bought in the store will cost you several times more expensive than the one you make yourself.Second, you'll know for sure that the filling does not contain anything superfluous.Another advantage is the fact that you will be able to create a unique liquid with a fortress and a taste that suit you and it may not commercially available.The main reason for the fans of electronic cigarettes often resort to self-kneading liquid, of course, is price.Experienced smokers argue that the price of filling up shopping more than 5 times.

Procedure

1) Propylene glycol and glycerol are the basis of charging, these components need to be mixed in the optimum proportions of each specific case and added to the distilled water.

2) Decide on the desired concentration of nicotine.For beginners, it is best to purchase a diluted.

In order to properly calculate the amount of ingredients necessary to determine the approximate number of cigarettes smoked daily by you, then multiply this figure by the nicotine content per cigarette (which you can read on the pack).For example, you are usually limited to one pack a day, that is 20 cigarettes multiplied by, say, 0.8 mg nicotine (found in 1 pc.), We obtain 16 mg.This means that you should start with 16 mg of liquid and gradually reduce the concentration.

3) The remaining 10% - a flavoring.

Here we answer the often asked question today about how to make a liquid for electronic cigarettes.Instructions, as you can see, is nothing daunting.The main thing - to follow it clearly and seriously approach the process.

Precautions

In the process of filling, we are dealing with, though simple, but still with the chemical reaction, so you should be extremely careful.Once again we remind that buying a pure, not diluted nicotine, you are at risk of both their own health and the health of those around you.All purchased ingredients should be stored in sealed packaging in a place where they just do not come across children or pets.Be responsible!Do not think that the electronic cigarette is harmless, so you can smoke it in unlimited quantities.Do not forget that in the fluid also contains nicotine, which is harmful to your health, know the measure of all things.Do not purchase ingredients for liquid from questionable sellers or acquaintances.Trust only mark of quality on the packaging and be sure to pay attention to the degree of purification of USP.Numerous studies have shown that all the components in small quantities are safe for human health.Some

against

Not all support the independent production of refills for ES, explaining that an inexperienced person can harm your health through ignorance or negligence.According to many, it is better to entrust this business to professionals who know exactly what and in what proportions to mix.If you are not sure that they can accurately follow the instructions, and do not mix, the risk is not worth it.In such cases it is better to overpay and buy ready-made liquid in the store, thereby sparing themselves the trouble and experiences.

Conclusion In summary, we formulate some defining moments:

1) Classical liquid for electronic cigarette contains 5 components.These include propylene glycol, nicotine, glycerol, purified water and flavorings.

2) In the process of creating or selecting a liquid, it is important to pay close attention to the percentage of nicotine, the ratio of propylene glycol and glycerol and non-toxicity of flavorings are used.

3) Prepare liquid at home is not difficult, just need to have all the necessary components and strictly follow the instructions provided.

4) Calculate the proportion should be in accordance with the calculator liquids.