many interests are different kinds of photo opportunities.Here each artist faced with a choice, so you need to know about each of them as much as possible.Consider one of them.Lapse recording is a photo, video recording of different processes taking place very slowly.These phenomena can be attributed as the classic versions blossoming flower, the child grows, the building and the phenomenon of carrying more exotic character - the melting of the snow, the movement of the sun and so on.The purpose of this survey - to fit a few hours or days and sometimes years in a small movie, a period of five to ten minutes.Many very interesting to watch the change of a phenomenon in a short period of time.
Lapse Recording Concepts
Tseytrafer - a timelapse.It takes a single image in a few minutes or hours, and then they are combined in the video.
Post - processing program or video editing laytrume.
Flicker - a glimmer of brightness from one frame to another.It is the most common mistake.
lapse recording: the p
First we need to translate the lens to manual focus.If you do not, then the focus is on wide-angle lenses can operate on different objects, in this case, even with a single focal length of the geometry of the frame will be from shot to shot change.To avoid unnecessary glare, you need to wear a hood.You must turn off the image stabilizer.The camera should be switched to Manual Mode.White balance must be set to MANUAL, and during shooting taymlapsa it does not need to touch it.
If you record in RAW, you can set the white balance laytrume or another editor, first treat the first frame, and then apply this setting to the other frames.It takes more time, but the result will be much better.Therefore it is necessary to shoot in RAW.When working with one of the new Canon cameras can be set to sRAW (half resolution), as even FullHD-Video can be shot at five megapixels.However, at high resolution, you can have more options for treatment.RAW gives you the opportunity to correct errors of exposure, remove noise and change the colors.Sort for the post will be greatly simplified by creating a new folder on the camera with the time-lapse shooting each new taymplasta.
Now you can say about the diaphragm.It can not be twice in a row to close in the same position, so be sure to appear in the video flicker.To solve this problem there are two solutions.The first solution is to use completely of manual lenses.For Canon cameras, you can set the desired aperture, and then click on the button check the depth of field, turn the lens, hold it.In this case, the diaphragm will be in the exposed position.
lapse recording should be carried out in the movement to certain parameters in relation shutter interval, which should be at the level of two to one, that is, if the shutter speed is selected at around two seconds between shutter must be exactly four seconds.This is not a strict requirement, but this should be pursued.The average interval between frames is set at around four seconds, but in windy conditions correctly installed on one or two.ISO speed is set not more than 3200.
Everyone knows that at high temperatures the camera "noise" a lot more, which is why the unit is to cover from the sun by means of a cap or T-shirt, which will protect it from overheating.But make sure that the shelter was not in sight of the objective.States should use the most robust and stable.To save energy, turn off the correct view after shooting.
As you can see, time-lapse photography is a very tedious and difficult work, but the result is amazing.